To remove burn-in on Plasma TV screens, panels, monitors cause the TV channels logos is a constantly placed on the same position, you will need to demonstrate "digital noise" video to erase burn-in effects from your Plasma screen. Burn-in is the Plasma screens technology feature. Modern plasma panels have good panel structure to avoid the burn-in dramatically, but it still have such kind of problem. So, you need to "refresh" your panels using special "noisy" video signal, which variations are placed on Plasma TV Logo Removing DVD.
The main DVD menu is shown at the next image
Plasma panel user could select one mode of 6 available for each aspect ratio (AR). Mode 4 have video signal with 4x4 pixels video segments placed in random order on each frame, so plasma panel receive "digital noise" video signal. Mode 8 - 8x8 pixels frame blocks, Mode 16 - pixels frame blocks. Each Mode has 2 speeds - High and Low. The efficiency of each mode depends on type of burn-in on your screen and how your plasma panel reacts on such kind of signal. Author of this DVD could not give you information about difference between Samsung, Panasonic, etc plasma panels, so please test your panels in individual order to detect what Mode is the best for your device. In most cases Plasma panels have 16:9 AR in their screen sizes, but as the additional option the "Modes 4, 8, 16" in 4:3 AR are also available.
Mode 4 Frame
Mode 8 Frame
Mode 16 Frame
The video signal is not static, so playing back this video during 30 minutes will give you some results, to repair plasma screen fully may be will be needed to play video during two hours, the time period is the test value for each model of plasma screen.
7-zip format. These archives contain ISO and MDS files to burn DVD with any software, such as free
Depending on the TV System supported by your DVD Player, please select to download PAL or NTSC DVD archive. If you have modern multi system DVD player, use any of archive
Q: Can I distribute freely your Plasma TV Logo Removing DVD archives?
A: Yes, you can. If you reprint/translate this page, please set back link as a source to this page. Please do not give direct hot links to download 7-zip archives, send visitors to this page
Q: Could this DVD repair all kind of plasma screens burn-in?
A: No, it is not possible for all conditions and types of screens. Sometimes the burn-in could not be removed cause the user did not did anything to avoid burn-in, and the static image will still forever. So please repair your plasma periodically using such kind of "refreshing"
Update - PLASMA TV LOGO REMOVING MKV
In our time it is very popular to use internal TV media player with MKV support, or external MKV playback devices. For this purpose you could use next PLASMA TV LOGO REMOVING MKV files, which are 10 seconds time length,
so you need to enable loop playback in your TV or external media player. All files are in 16:9 Mode, 23.976 fps. For most compatibility, Blu-Ray/DXVA settings were used for these MKV files (MediaInfo Log):
Format : Matroska
ID : 1
Format : AVC
Format profile : High@L3.1
Format settings, CABAC : Yes
Format settings, ReFrames : 5 frames
Bit rate : 4 657 Kbps
Nominal bit rate : 5 000 Kbps
Maximum bit rate : 17.5 Mbps
Width : 720 pixels
Height : 400 pixels
Frame rate : 23.976 fps
Writing library : x264 core 142 r2431 ac76440
Encoding settings : cabac=1 / ref=6 / deblock=1:0:0 / analyse=0x3:0x133 / me=tesa / subme=11 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=24 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=-2 / threads=3 / lookahead_threads=1 / sliced_threads=0 / slices=4 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=1 / constrained_intra=0 / bframes=3 / b_pyramid=1 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=1 / weightp=1 / keyint=24 / keyint_min=1 / scenecut=40 / intra_refresh=0 / rc_lookahead=24 / rc=abr / mbtree=1 / bitrate=5000 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / vbv_maxrate=17500 / vbv_bufsize=17500 / nal_hrd=vbr / filler=0 / ip_ratio=1.40 / aq=1:1.00